Back to Main List

On to the Next Step

Time to lay the 1/4" foam on the playing surface. Test fit the foam over the playing surface. Line it up so it's pretty well centered. Peel back about 1/2 of the foam and spray the wood surface liberally with your 3M glue spray. Then slowly and evenly lay the foam back down. Take a rolling pin or something round and roll out any air bubbles you find. Also use the rolling pin to help the foam adhere to the table. Now lift up the other half of the foam and do the same thing. 

Give it 15 minutes to dry. It doesn't take long. 

Now cut the foam along the edge of the wood playing surface. I used a my wife's best paring knife and one very hairy arm. 

On to the Next Step